Olivetti JP 90 Manual Del Usuario página 43

All manuals and user guides at all-guides.com
To run the SETUP utility, proceed as follows:
1. Insert the diskette containing the SETUP utility in drive A
(usually) of your computer.
2. At the DOS prompt, type A:\ (or B:\)????? (your printer
name as indicated on the diskette label), and press
ENTER.
3. The programme will read the printer's identification code
and its internal settings. It will then display this information
on your PC screen.
4. If you click on Change Parameters, the parameter group
selection screen for the emulation currently selected is
displayed.
You can now select, one at a time, the parameter groups
containing the feature(s) you wish to change.
5. If you click on Factory Default, you restore the default
settings within the emulation currently selected .
6. If you click on Quit, you abandon the SETUP utility and
return to DOS. If any settings were changed, you will be
prompted to "Save setup into printer?".
The parameter settings defined in the driver always have
priority over the settings made using the SETUP utility.
User Guide - Using Software 25