Olivetti JP 90 Manual Del Usuario página 288

All manuals and user guides at all-guides.com
Parameter Value
Text scale mode (continued)
DISABLED ENABLED
63 lines 66 lines
of text of text
BOF = 12.7 mm
Word length 7 bits Older computers transmit using a
( only EPSON 8 bits 7-bit word length, or with the
LQ 850 eighth bit set to 1. In most cases,
emulation ) the 8 bits setting will meet your
requirements.
Slashed Zero Off Provided to avoid confusion
( not PCL III + On between the zero (0) and the
emulation ) upper case "o" (O). It is
independent of your application
driver.
Print size Normal Select "Condensed" to reduce the
( not PCL III + Condensed character width.
emulation )
A-16
Function Parameter
Line Feed length
( not PCL III +
emulation )
11 in
(Letter size)
Alternative Graphic
Mode (AGM)
( only IBM Proprinter
X24 emulation )
Character table
( only IBM Proprinter
X24 emulation )
Programmable Printer Features - User-Definable Parameters
Value Function
6 lpi Allows you to select the depth
8 lpi of each LF code received. In
7/72 inch most cases, your application
5 mm driver handles this auto-
matically. The first two
settings indicate a number of
lines per inch (lpi); the other
two settings are absolute
settings for individual line
feeds.
Off Allows your printer to handle
On EPSON LQ 1000 or LQ 800
graphic data.
Table 1 With Table 2, you can print
Table 2 Upright and Italic characters.
With Table 1, the Italic
characters are not available,
but are replaced with the
printer function codes.