Using Batteries; Market Standard Batteries; Rechargeable Battery Pack - Olivetti JP 90 Manual Del Usuario

All manuals and user guides at all-guides.com

Using Batteries

Instead of using the AC/DC adapter and the electrical power
supply to power your printer, you can operate it either with
ten LR6/ AA-size 1.2 to 1.5 Volt market standard batteries
available from any electrical supplies shop and most
supermarkets or with one of the optional battery packs
available.

Market Standard Batteries

To insert the batteries in the printer, proceed as follows (see
also the sequence of figures on page V):
•
Remove the battery container from the rear of the printer:
– hold the printer vertical
– with the index or middle fingers, press down on the two
catches on the underside of the printer and,
simultaneously, with the thumbs, push the battery
container outwards.
•
Remove any batteries from the battery container.
•
Insert the new batteries in the battery container, making
sure that their polarity is correct (see the indications on the
inside of the battery container).
•
Reinsert the battery container in the printer.
The battery container must NOT be removed from the
printer when you transport it.
20
Batteries should always be replaced/recharged all at the
same time.
Do not mix battery types and always dispose of used
batteries in accordance with your local legislation.

Rechargeable Battery Pack

Two types of battery pack (item 1 on page IV), recognised
automatically once inserted in the printer, are available:
•
A 12 Volt, 600 mAh capacity Ni-Cd (nickel-cadmium)
battery pack which gives an autonomy of operation of
approximately 80 pages*.
•
A 12 Volt, 1 Ah capacity Ni-MH (nickel-metal hydride)
battery pack which gives an autonomy of operation of
approximately 140 pages*.
With a fully-charged battery pack and normal usage.
The duration of the battery pack will depend on the
volume of text per page.
User Guide - Using Batteries