Connecting Optional Components - Sony ZS-2000 Manual De Instrucciones

Connecting
optional
components
You can record a CD on a MiniDisc or enjoy
the sound from a VCR, TV or MiniDisc
player/recorder through the speakers of
this player.
Be sure to turn off the power of each
component before making connections.
For details, refer to the instruction manual
of the component to be connected.
Note
Connect the cables
firmly to avoid any
malfunction.
GB
38
Setting Up
LINE
Recording a CD on a MiniDisc recorder and
DAT recorder
to OPTICAL
DIGITAL OUT
(CD) jack
Rear panel of
this player
Digital Connecting
cable* POC-5AB
(not supplied)
* Select a connecting cable depending on the type of the
digital input jack of the recorder to be connected. For
details, refer to the instruction manual of the component to
be connected. The OPTICAL DIGITAL OUT (CD) jack of
this player is square-shaped jack.
The type of the jack
of the component
to be connected
Optical miniplug
(MiniDisc recorder, etc.)
L-type 7-pin connector
(DAT recorder, etc.)
Square-shaped optical
connector (MiniDisc
recorder, DAT recorder, etc.)
MiniDisc
recorder, DAT
recorder, etc.
to digital
input jack
Model number of
the connecting cable
POC-5AB, POC-10AB,
POC-15AB
POC-DA12P
POC-10A, POC-15A