Sony ZS-2000 Manual De Instrucciones página 9

Tips
• The "FM1" and "FM2"
bands have the same
functions. You can store
the stations you want
separately in "FM1" and
"FM2" (page 16).
• If the FM broadcast is
noisy, press PLAY
MODE•MONO/ST
(MODE on the remote)
until "Mono" appears in
the display and the
radio will play in
monaural.
• Next time you want to
listen to the radio, just
press RADIO BAND•
AUTO PRESET. The
player turns on
automatically and starts
playing the previous
station.
Use these buttons for additional operations
PLAY MODE
OPERATE
MONO/ST
To
adjust the volume
turn on/off the radio
To improve broadcast reception
FM:
Set the FM ANTENNA SELECTOR at the rear of the
player to " " (telescopic aerial).
Reorient the aerial for FM.
MW/LW:
Adjust the orientation of the loop aerial by aligning it
with the marks on the base one by one. Be careful not
to move the base of the aerial unit.
If the broadcast is still noisy, connect the external
aerial (page 36).
VOLUME
Do this
Turn VOLUME toward +
or – (press VOL +, – on
the remote).
Press OPERATE.
Basic Operations
GB
9