Installation; Receiving The Product; Dimensions And Weight; Handling - Sime BRAVA SLIM HE 25/55 Manual De Instalación Y Mantenimiento

2

INSTALLATION

m
CAUTION
The appliance must only be installed by the Sime
Technical Service or by qualified professionals who
suitable protective safety equipment.
MUST wear
2.1

Receiving the product

Brava Slim HE 25/55 - 30/55 ErP
single unit protected by cardboard packaging.
The plastic bag found inside the packaging contains the
following:
– Installation, use and maintenance manual
– Paper template for boiler installation
– Certificate of warranty
– Hydrostatic test certificate
– System booklet
– Bag with expansion plugs
d
IT IS FORBIDDEN
To leave packaging material around or near children
since it could be dangerous. Dispose of it as prescribed
by legislation in force.
2.2

Dimensions and weight

H
L
78
appliances are delivered in a
Fig. 8
P
Fig. 9
Description
W (mm)
D (mm)
H (mm)
Weight (kg)
2.3

Handling

Once the packaging has been removed, the appliance is to
be handled manually, tilting it slightly, lifting it and applying
pressure in the points indicated in the figure.
d
IT IS FORBIDDEN
To grip the appliance casing. Hold the "solid" parts of
the appliance such as the base and structural frame.
a
WARNING
Use suitable tools and accident protection when
removing the packaging and when handling the
appliance. Observe the maximum weight that can be
lifted per person.
2.4

Installation room

The room where the appliance is to be installed must comply
with the Technical Regulations and Legislation in force. It must
be equipped with suitably sized ventilation openings when the
installation is a "TYPE B" installation.
The minimum temperature of the installation room must NOT
be lower than -5 °C .
m
CAUTION
– Before assembling the appliance, the installer MUST
make sure that the wall supports the weight.
– Remember to consider the space needed in order to
access the safety/adjustment devices and to carry
out maintenance interventions (see Fig. 11).
EN
Brava Slim HE ErP
25/55 30/55
600 600
460 460
950 950
56 57
Fig. 10