Terminator - Grundfos CU 401 Instrucciones De Instalación Y Operación

All manuals and user guides at all-guides.com

9. Terminator

14
• Fit a new battery according to the specifications.
See section 6. Technical data.
• Mount the CU 401 on the DIN rail, push the modules
together and fit the terminals.
• Turn the locking screw to position "locked".
• Switch on the power supply (PU 101).
• Set the clock using the operator display (OD 401).
The last module in the row must be terminated by a terminator.
See illustration.