Starting / Stopping The Engine - Stihl TS 410 Manual De Instrucciones

Ocultar thumbs Ver también para TS 410:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Change the fuel pickup body every year
Drain the fuel tank.
N
Pull the fuel pickup body out of the
N
tank with a hook and disconnect it
from the hose.
Connect a new fuel pickup body to
N
the hose.
Return the fuel pickup body to the
N
tank.
TS 410, TS 420
Starting / Stopping the
Engine
3
3
2
Press throttle trigger lockout (1) and
N
throttle trigger (2) simultaneously
Hold both triggers down
N
Move the slide control (3) to START
N
and hold it in position too
Release the throttle trigger, slide
N
control and throttle trigger lockout in
succession – starting throttle
position
4
Set the choke (4) according to the
N
engine temperature
c If engine is cold
e if the engine is warm (even if the
engine is already running but is still
cold or if the warm engine was shut
1
off for less than 5 min)
f if the engine is hot (if the hot engine
was switched off for longer than
5 min)
English
33

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Ts 420

Tabla de contenido