Specifications - Stihl TS 410 Manual De Instrucciones

Specifications

EPA / CEPA
The Emission Compliance Period
referred to on the Emissions
Compliance Label indicates the number
of operating hours for which the engine
has been shown to meet Federal
emission requirements.
Category
A = 300 hours
B = 125 hours
C = 50 hours
CARB
The Emission Compliance Period used
on the CARB-Air Index Label indicates
the terms:
Extended = 300 hours
Intermediate = 125 hours
Moderate = 50 hours
Engine
STIHL single cylinder two-stroke engine
TS 410, TS 420
TS 410
Displacement: 4.07 cu. in.
(66.7 cm
Cylinder bore: 1.97 in. (50 mm)
Piston stroke: 1.34 in. (34 mm)
Engine power accord- 4.3 hp (3.2 kW)
ing to ISO 7293: at 9000 rpm
Idling speed: 2500 rpm
Maximum spindle
speed: 5350 rpm
TS 420
Displacement: 4.07 cu. in.
(66.7 cm
Cylinder bore: 1.97 in. (50 mm)
Piston stroke: 1.34 in. (34 mm)
Engine power accord- 4.3 hp (3.2 kW)
ing to ISO 7293: at 9000 rpm
Idling speed: 2500 rpm
Maximum spindle
speed: 5350 rpm
Ignition system
Electronic magneto ignition
Spark plug
(suppressed): Bosch WSR 6 F
Electrode gap: 0.02 in.
(0.5 mm)
Fuel system
All position diaphragm carburetor with
integral fuel pump
Fuel tank capacity:
Air filter
Main filter (paper filter) and flocked wire
3)
mesh auxiliary filter
Weight
Without fuel, without abrasive wheel,
with water attachment
TS 410:
TS 420:
3)
Without fuel, without abrasive wheel,
with electronic water control
TS 410:
TS 420:
Abrasive wheels
The quoted maximum permissible
operating speed of the abrasive wheel
must be greater than or equal to the
maximum spindle speed of the cut-off
machine used.
Abrasive wheels (TS 410)
Outside diameter:
Max. thickness:
Bore diameter/spindle
diameter:
24.0 oz
Tightening torque:
(0.71 l)
English
20.7 lbs
(9.4 kg)
21.2 lbs
(9.6 kg)
21.8 lbs
(9.9 kg)
22.3 lbs
(10.1 kg)
12 in.
(300 mm)
0.189 in.
(4.8 mm)
0.787 in.
(20 mm)
22 lbf ft
(30 Nm)
47