Fueling - Stihl Cutquik TS 410 Manual De Instrucciones

English / USA

Fueling

Before fueling, clean the filler cap and
the area around it so that dirt cannot fall
into the tank.
Thoroughly shake up the mixture in the
canister before fueling your machine.
To avoid the risk of burns or other
injuries due to escaping gasoline
vapors, open the filler cap carefully
so that any excess pressure in the
tank can escape slowly.
Never use a tool to open the
bayonet catch. This could damage
the cap and cause fuel to leak out.
Do not spill any fuel and do not fill the
tank up to the brim.
32
Open the filler cap
1.
2.
Press the cap down with your hand as
far as possible, turn it counterclockwise
(approx. 1/8 turn) and remove it.
Close the filler cap
1.
2.
: Fit the cap and turn it until it
engages in the bayonet mount
: Press the cap down with your hand
as far as possible and turn it
clockwise (approx. 1/8 turn) until it
engages completely
Change the fuel pick-up body
every year
: Drain the fuel tank
: Pull the fuel pick-up body out of the
tank with a hook and disconnect it
from the hose
: Connect a new fuel pick-up body to
the hose
: Return the fuel pick-up body to the
tank
TS 410, TS 420