Tabla De Contenido - Stihl Cutquik TS 410 Manual De Instrucciones

Contents
Guide to Using this Manual .............. 2
Safety Precautions and
Working Techniques ......................... 3
Application Examples ..................... 18
STIHL composite resin
cutting wheels ................................. 21
STIHL diamond cutting wheels ....... 21
Assembling the
cast arm and guard ........................ 25
Tensioning the ribbed V-belt ........... 27
Abrasive wheels ............................. 28
Fitting / replacing an
abrasive wheel ............................... 29
Fuel ................................................ 31
Fueling ............................................ 32
Starting / stopping the engine ......... 33
Air filter system ............................... 35
Motor Management ........................ 36
Setting the carburetor ..................... 37
Spark arresting screen
in the muffler ................................... 38
Checking the Spark Plug ................ 39
Replacing the starter rope
and rewind spring ........................... 40
Replacing the V-belt ....................... 42
STIHL cut-off machine cart ............. 43
Storing the machine ........................ 43
Maintenance chart .......................... 44
Main parts of the machine .............. 46
Specifications ................................. 48
Special Accessories ....................... 49
Maintenance and Repairs ............... 49
STIHL Incorporated
Federal Emission Control
Warranty Statement ........................ 50
Trademarks .................................... 52
STIHl
TS 410, TS 420
English / USA
Allow only persons who understand this
manual to operate your cut-off machine.
To receive maximum performance and
satisfaction from your STIHL cut-off
machine, it is important that you read
and understand the safety and
maintenance precautions, starting on
page 3, before using your cut-off
machine.
Contact your STIHL dealer or the STIHL
distributor for your area if you do not
understand some instruction in this
manual.
!
Warning!
Because a cut-off machine is a high-
speed cutting tool, some special safety
precautions must be observed to reduce
the risk of personal injury.
Careless or improper use may cause
serious or even fatal injury.
1