CLEAN
4219-450-03601 MANUAL GAG. ANIMA CLASS-PREST. EN-ES-PT.indd 13
The machine will remind you to install the milk carafe and open the milk dispensing
spout.
4 The machine pours in the cup or in the tumbler a preset amount of milk froth
first and then a preset amount of coffee.
Note: press the OK button to interrupt milk or coffee dispensing.
5 After the preparation of coffee and milk-based beverages, the display requests
you whether you wish to perform a quick clean of the milk carafe. This
operation can be enabled within 10 seconds (see "Quick Clean of the Carafe").
This operation can be performed with the carafe containing milk.
It is recommended to perform the quick clean at least once a day. Press the OK
button to confirm or the ESC button to perform the quick clean later.
Special beverages and hot water
How to select special beverages
1 Press the MENU button and select DRINKS.
2 Press the OK button to confirm.
3 Scroll through the menu and select the preferred beverage.
Dispensing hot water
Warning: when the preparation of hot water starts, the hot water dispensing spout
may spray steam and hot water. Before removing the hot water dispensing spout,
wait until the end of the preparation.
1 Insert the hot water dispensing spout.
2 Press the MENU button, select DRINKS, confirm and scroll through the menu to
select "HOT WATER".
Warning: select HOT WATER in the menu just when the hot water dispensing spout
is installed.
3 Press the OK button to confirm. The display reminds you to insert the hot
water dispensing spout: press the OK button to confirm. The machine will start
dispensing hot water.
4 To stop hot water dispensing, press the OK button.
ENGLISH
13
03/12/2018 15:01:29