Note that inserting new batteries or pressing ACL will
reset the computer's memory, causing any current game
to be lost.
Making Moves
2.
Follow the steps below to start a game.
a. If necessary, press GO/STOP to turn the computer on.
b. Set up the chess pieces in their starting positions with the
White pieces nearest to you, as shown in Figure 1-2, and
press NEW GAME. The display will indicate that you
should play a White piece:
Note: If NEW GAME is pressed while certain modes are
selected (Teach Mode, Openings Coach, or Non Auto
Mode), these modes will automatically be cancelled.
c. To make a move, lightly press down on the piece you
want to move until you hear a 'beep' (see Figure 1-3). The
computer's sensory board registers your move, and the
display shows the from square that was pressed on the
left-hand side.
d. Take the piece and lightly press it down on the square
you want to move to. A second 'beep' sounds, and the
computer briefly shows the to square on the right-hand
side of the display.
As soon as your move is finished (if you have Sound and
Coach selected), the display will show Coch while it
00:00
PM
E2:__
E2:E4
7
Fig. 1-5a
Fig. 1-5b
Fig. 1-6a
Fig. 1-6b