Mounting The Loop Handle - Stihl FS 565 Manual De Instrucciones

English
2
1
2
1
N Push the throttle cable (1) into the
retainer (2).
18

Mounting the Loop Handle

A factory-new machines comes with the
loop handle aready mounted.
Using the barrier bar
A barrier bar may have to be mounted to
suit the tool you intend to use – see
"Approved Combinations of Cutting
Attachment, Deflector, Handle and
Harness."
The barrier bar comes standard with the
machine or is available as a special
accessory.
Mounting the barrier bar
1
3
N Fit the washer (1) on the M5x23
screw (2).
N Hold the barrier bar (3) against the
loop handle and insert the screw
with washer.
N Tighten down the screw (2) firmly.
Leave the barrier bar permanently
mounted to the loop handle.
FS 56, FS 56 R, FS 56 C, FS 56 RC
0.2 in
(5,3 mm)
2