Publicidad
Idiomas disponibles
Idiomas disponibles
First Section - FOR THE USER
WORKING AND USE
The glasswashing machine can wash up to 900 mixed-size glasses every hour.
The machine protection degree is IP21, therefore it should not be washed with direct high pressure jet water.
The objects to be washed should be correctly arranged for a good washing-up result.
We suggest to descale glasses, from time to time, in order to remove calcareous and/or starchy sediments
by soaking them in suitable solutions suggested by your cleansing agent supplier.
If you need to buy new dishes remember the following: Dishes and cups: preference must be given to
china or non-porous pottery articles, with smooth surface. Glasses: choose a glass suitable to be washed
in dish-washing machines. Surfaces must be smooth and bottoms as flat as possible.
OPERATION BEFORE WASHING
B
EFORE STARTING
THE WORKING OPERATION BE
:
SURE THAT
-
the cock is open;
-
the filters and the overflow are in
their housings;
-
the wash arm and the rinse arm are free to
pivot;
-
brightener and washing powder dispenser
containers are loaded.
CAUTION: Observe the safety notes and
dosage data for the use of chemicals. During
the use of the chemical substance wear
protective clothing, gloves and protective
glasses.
Do
not
products.
T
:
HEN PROCEED
A
-
Open
the door and put into the tank,
possibly over the pump filter, about 40 gr.
of non-lathering detergent in powder.
Every 10 cycles add about 20 gr. of detergent.
If the machine is provided with an automatic
dosing device, control that the detergent is in its
container.
B
-
Place the dishes in the basket minding to
previously remove all solid waste and fat.
Do not overload baskets, dishes must not be
placed one upon the other, water must have the
way to run on each part of the same.
C
- Turn the machines on by wall switch and
push the switch "A" situated in Dis.1.
At this moment the thermometer display lights up
And the tank fills up.
N.B.: If the machine is equipped with a water-
softener with automatic regeneration, each 90
seconds of tank filling duration, the machine stops
for about 2 minutes to carry out the regeneration.
mix
different
cleaning
When the tank is full the control lamp for cycle "2"
lights up.
Please pay attention to the opening and
closing of the door of the Dish/Glass-washers. Do not
use the machine if you are wearing clothes/items that
could get entangles in the dishwasher parts. As they
can limit personnel's regular moving ability!
D
– Introduce the basket in the dishwasher.
The control lamp "E" will flash in case the door of
the dishwasher is open.
Before you start the cycle be sure that the control
lamp "D" is flashing. This means that the water for
the
washing
cycle
temperature reached the ideal temperature for
working.
E
– Choose the washing period cycle and push
the button "B" between the following items:
- lamp 1 flashing – short cycle of 1 minute
- lamp 2 flashing – medium cycle 2 minutes
- lamps 1 and 2 lightening at the same time
long cycle of 3 minutes.
The washing period cycle has to be chosen
regarding the dirt that has to be removed.
F –
Close the door of the dishwasher.
Push the button cycle "C"
The dishwasher starts the washing with the period
you chosen. Additional to this period will be a
pause of 5 seconds and a rinsing period of 18
seconds with clean water about 85° to 90°C.
The control cycle lamp is flashing up to the end of
the complete washing period. Finished the
washing period the control lamps will stop
lightening.
The lighting of the control lamp "D" means that
the water reached the needed temperature of 85°
to 90°C.
25
ENGLISH
and
the
rinsing
water
Publicidad
