Yamaha WARRIOR Manual Del Propietário página 266

1. Oil gallery bolt
1. Boulon de rampe de graissage
1. Perno del conducto de aceite
Oil pressure check
1. Put a cloth around the cylinder.
2. Slightly loosen the oil gallery bolt in the cylin-
der head.
3. Start the engine and keep it idling until oil be-
gins to seep from the oil gallery. If no oil
comes out after one minute, turn the engine
off so it will not seize and find the cause.
4. Start the engine, and then check the oil pres-
sure.
5. After checking, tighten the oil gallery bolt to
the specified torque.
Tightening torque:
Oil gallery bolt:
7 Nm (0.7 m·kgf)
CAUTION:
_
Be sure to check the oil pressure after replac-
ing the engine oil.
_
8-23