Operation; Initial Start-Up; Fitting The Clipper Head - Heiniger Saphir Cord Traducción Del Manual Original

Relative humidity: max. 75 %.When storing longer than 3 months, check
X
periodically the general condition of all parts. If necessary, refresh or
renew the conservation.
6

Operation

WARNING!
Incorrect operation may cause damage on persons or objects. Therefore:
y Do all the steps of operation according to the indications in this instruc-
tion manual.
6.1

Initial start-up

6.1.1

Fitting the clipper head

1
Fig. 7
Fig. 8
Fig. 9
Fig. 10
NOTE!
For proper operation make sure that the clipper head (1) is engaged correctly.
10
2
1 2
1
Translation of the original instructions / Small animal clipper
1. If the blade hinge (2) is acci-
dentally closed, lift the latter up
using a screwdriver (1) while si-
multaneously pressing the blade
interlock.
2. Fit the clipper head (1) on the
open blade hinge (2).
3. Fold the clipper head (2) by ap-
plying light pressure on to the
clipper (1) when the device is
switched on.
2
4. Make sure, that the clipper head
(1) is engaged firmly.