Care And Maintenance; Technical Specifications - Kärcher VC 6 Premium Manual

Finish operation
 Turn off the appliance and disconnect the mains
plug.
Illustration
 Push the take-up cable button. The cable will pull it-
self automatically into the appliance.
 Hang the floor nozzle on the backside of the appli-
ance into the parking holder, and push into the
pause position.
Transport, storage
 Hold the appliance at the carrying handle when you
want to transport it and store it in dry rooms.
Note: It is recommended that you first completely
push in the telescopic suction pipe.

Care and maintenance

Cleaning the device
 Clean the appliance and accessory parts made of
plastic with a commercial plastic cleaner.
 Clean the dust chamber with a dry wipe cloth/ dust
brush.
Replacing the filter bag
Order no. 6.904-329
Contents: 5 filter bags with cap and 1 engine protection
filter.
Note
Separate the telescopic suction pipe from the handle to
read the filter change indicator.
Illustration
 If the filter change indicator in the cover glows red,
then please change the filter bag.
 Use the closing lever and open the lid.
Illustration
 Unlock the holder of the filter bags and pull towards
the outside.
Illustration
 Close the filter bag using the closing flap, remove
the filter bag and dispose it off.
Illustration
 Push the new filter bag into the support until the
stop. First press the flap downwards; then push the
holder into the casing and lock it at the appliance
casing.
Change the motor protection filter
Motor protection filter: change before the last filter
bag is removed from the filter bag package.
 The motor protection filter is behind the inserted fil-
ter bag. Change the motor protection filter before
you insert the filter bag.
Illustration
 Unlock the frame and remove.
 Remove the lower part of the frame, take out old
engine protection filter and dispose it off. Insert the
new engine protection filter in the frame and re-
place the lower part of the frame.
Illustration
 Insert and click the frame into its place.
10
Replace HEPA filter
Order no. 6.414-805
Filter for pure blower air.
HEPA filter *: Change once a year.
Illustration
 Open cover.
 Unlock the HEPA filter and remove.
Illustration
 Insert the new HEPA filter and click it into place.
 Close the lid.
* EN1822:1998
Cleaning the floor nozzle
Clean the reversible floor nozzle at reglular intervals!
 Remove the nozzle from the suction pipe.
Cleaning the accessories
Illustration
 Handle and suction tube can be disconnected in or-
der to clean or if clogged. Push the 2 interlocks and
pull apart.
 Connect handle and suction tube and insert.
Changing the battery
Note: The battery should not be empty if you want to en-
sure cable-free transmission. Please replace the bat-
tery if you see no reaction or just inadequate reaction
when you press the keys.
 Slide and remove the battery compartment cover.
 Remove old batteries and dispose them off proper-
ly.
 Insert new batteries; pay attention to correct polar-
ity.
 Replace the battery compartment cover and close
it.

Technical specifications

Voltage
Current type
Mains fuse (slow-blow)
Protective class
Weight (without accessories)
Action radius
Dimensions
Nominal width, accessories
Sound pressure level
(EN 60704-2-1)
Eco design as per 666/2013
Energy efficiency category
Indicative annual energy con-
sumption
Carpet cleaning class
Hard floor cleaning class
Dust emission class
Sound power level L
Rated power input
Subject to technical modifications!
EN – 7
220 - 240
50-60
16
II
6,6
10
ø 380 x
380
35
57
A
25,8
D
D
A
72
WA
600
V
Hz
A
kg
m
mm
mm
dB(A)
kWh/a
dB(A)
W