Your Appliance; How Induction Hobs Function; Pan Detection - ROBLIN MAESTRO Manual De Uso

Cooking zone position indicator
The cooking zones are able to work in combination, creating a single
zone with the same power level. Front master and back secondary cooking
zones. To activate the Bridge function: touch simultaneously the 2 bar and
the symbol
possible to select the power level. To deactivate the bridge function simply
repeat the same activation procedure.
Cooking zone selection
Increase / Decrease power level
Supplementary power feature which remains active for 10 min, after which
the temperature returns to the previously set value.
–
Touch and scroll along the Selection bar and activate the Power Booster.
The power booster level is shown on the display of the selected zone with
the symbol
Temperature Manager activation. The display shows
Cooking / Keep warming at 42 °C
Cooking / Keep warming at 74 °C
Cooking / Keep warming at 92 °C
Bridge zone between two cooking zones activated
Power Booster activated

YOUR APPLIANCE

How induction hobs function

Induction hobs function considerably
differently to conventional hobs or solid
plates. The induction coil under the glass
ceramic creates a magnetic field that
alternates quickly and which directly heats
the magnetisable base of the cookware.
The glass ceramic is only heated by the
hot cookware. If the cookware is removed
from the cooking zone, the power supply
is interrupted immediately.
lights up. With the selection bar of the master zone it is
.

Pan detection

Every cooking zone is equipped with pan
detection. The pan detection recognises
cookware with a magnetisable base that is
suitable for use with induction hobs.
If the cookware is removed during operation
or unsuitable cookware is used, the display
near the bargraph flashes with
If there is no cookware placed on the cooking
zone during the pan detection time of 10 sec:
.
.
EN
31