Bosch GLM400CL Instrucciones De Funcionamiento Y Seguridad página 34

Gradient Measurement/Digital Spirit Level
Select the inclination measurement/digital spirit level
The measuring tool automatically switches between two
states.
88.0°
Memory Functions
The value or end result of each completed measurement is
automatically saved.
Tip: You can save your measurement as a photo for reference.
The following information is printed on the photo:
– Measuring result
– Measuring function used
– Reference
– Date and time
– Tilt angle (only with spirit level switched on).
Memory value display
A maximum of 50 values can be retrieved (measured values or
photos with measured values).
Select the memory function using soft key 12 [
09.06.2017
4 4
13:20:23
30º
76´01˝ ⁄
34
2610050173 04-18 GLM400CL.indd 34
The digital spirit level is used to check the
horizontal or vertical alignment of an object (e.g.
washing machine, refrigerator, etc.). When the
1° 2° 3°
inclination 3° exceeds, the ball in the display lights
red.
Gradient measurement is used to measure a slope
or incline (e.g. of stairs, railings, when fitting
furniture, laying pipes, etc.). The left-hand side of
the measuring tool serves as the reference level
for grade measurement. If the display flashes
during measurement, the measuring tool has been
tipped too heavily to the side.
The number of the memory value is shown at the
top of the display, the corresponding memory
30´05˝
value is shown at the bottom and the corresponding
45´08˝
measuring function is shown on the left.
60´10˝⅝
Press button 4 [+] to browse forwards through the
saved values.
.
].
4/19/18 11:12 AM