Working Advice - Bosch GLM400CL Instrucciones De Funcionamiento Y Seguridad

Deactivating the Bluetooth
®
Interface
The Bluetooth
®
connection is deactivated in the basic settings.
To deactivate the Bluetooth
®
signal, press button 11 [–] or
switch off the measuring tool.
USB port
Data via USB Interface can be transferred from the measuring
tool to certain devices with a USB port (e.g. computer,
notebook) via its micro USB connection.
Connect the measuring tool to your computer or notebook
using the micro USB cable. The operating system on your
computer or notebook will automatically recognize the
measuring tool as a drive.
Note: As soon as the measuring tool is connected to a
computer or notebook via the micro USB cable, the lithium ion
battery is charged. The charge duration varies depending on
the charging current.

Working Advice

Further information can be found on the Bosch product
page.
The measuring tool is equipped with a radio interface.
Local operating restrictions, e.g. in airplanes or hospitals,
are to be observed.
General Information
The reception lens 20, the laser beam output 19 and the
camera 18 must not be covered during measurement.
The measuring tool must not be moved while taking a
measurement. Therefore, place the measuring tool, as far as
this is possible, against or on a firm stop or supporting surface.
Influence Effects on the Measuring Range
The measuring range depends on the lighting conditions and
the reflective properties of the target surface. For better visibility
of the laser beam in strong extraneous light, use the integrated
camera 18, the laser viewing glasses 26 (accessory) and the
laser target plate 25 (accessory) or shade the target area.
37
2610050173 04-18 GLM400CL.indd 37 4/19/18 11:12 AM