Bluetooth ® Interface - Bosch GLM400CL Instrucciones De Funcionamiento Y Seguridad

laser tool. The sudden bright laser beam may increase the risk
of personal injury or property damage.
Ensure there are no bystanders in the direct path of the laser
beam before turning on the laser remotely.
Data Transmission to other Devices
The measuring tool is equipped with a Bluetooth
which enables data transmission via radio technology to
certain mobile terminals/devices with a Bluetooth
(e.g., smartphones, tablets).
For information on the necessary system requirements for a
Bluetooth
www.bosch-pt.com
Further information can be found on the Bosch product
page.
For data transmission via Bluetooth
mobile terminal/device and measuring tool may occur. This
can be possible due to the distance between both devices or
the object being measured.
Activating the Bluetooth
to a Mobile Terminal/Device
The Bluetooth
activate the Bluetooth
the Bluetooth
The special Bosch "Measuring Master" app is available to
extend the range of functions of the mobile end device and to
make data easier to process. You can download this from the
store for your end device type.
The connection between mobile terminal/device and
measuring tool is established after the Bosch application has
started. If multiple active measuring tools are found, select the
appropriate measuring tool using the serial number.
The connection status, as well as the active connection (f), are
shown in the display 1 of the measuring tool.
36
2610050173 04-18 GLM400CL.indd 36
Bluetooth
Do not turn on laser remotely using the
Bosch app without line of sight to the
®
connection, please refer to the Bosch website at
®
interface is activated in the basic settings. To
®
signal, press button 4 [+]. Ensure that
®
interface is activated on your mobile end device.
®
Interface
®
, time delays between
®
Interface for Data Transmission
®
module,
®
interface
4/19/18 11:12 AM