Bosch GLM400CL Instrucciones De Funcionamiento Y Seguridad página 41

The
the
not
(horizontal or vertical).
The measuring tool was
moved or tilted while pressing
the button.
Bluetooth
The battery is too low.
No Bluetooth
Failure of the Bluetooth
connection
2610050173 04-18 GLM400CL.indd 41
Cause
surfaces used
calibration
accurately aligned
®
cannot be activated
®
connection
Corrective Measure
for Repeat the calibration on a
were horizontal or vertical surface;
if required, check the surface
first with a level.
Repeat the calibration and
hold the measuring tool in
place while pressing the
button.
Charge the measuring tool's
battery.
®
Switch
Bluetooth
tool and the mobile device.
Check the application on your
mobile terminal/device.
Check
activated on your measuring
tool and mobile terminal/
device.
Check your mobile terminal/
device for overload.
Reduce the distance between
measuring tool and your
mobile terminal/device.
Avoid obstructions (e.g.,
reinforced concrete, metal
doors) between measuring
tool and your mobile terminal/
device. Observe clearance to
electromagnetic disturbances
(e.g., WLAN transmitters).
off and restart
®
on the measuring
Bluetooth
®
if is
41
4/19/18 11:12 AM