Terminal Display; Meaning Of Symbols On Faceplate - Soehnle 6958 Instrucciones De Manejo

5. Controls and functions

5.3 Terminal display

5.4 Meaning of symbols on faceplate

Scale is zeroed, gross weight is 0, tare is 0
f
Scale is stable
f
NET Display reading is net weight; tare is not 0
f
Total Display data is accumulated total times, weight, pieces, or percentage
f
Hold Scale is in dynamic weighing mode
f
- Hold flashes - actual fluctuating weight is displayed
- Hold does not flash - locked weight is displayed
Peak Peak - Scale is in dynamic weighing mode. Hold type is PEAK-HOLD
f
BMI Scale is working in BMI mode
f
lb Measure unit is lb or lb:oz
f
oz Measure unit is oz or lb:oz
f
kg Measure unit is kg
f
g Measure unit is g
f
% Measure unit is % (in percentage weighing mode)
f
Pcs Measure unit is pieces (in counting mode)
f
Battery level
f
HI Data compare (check-weighing) is enabled. Current data (weight, pieces, or percent) is
f
above the specified upper limit
OK Data compare is enabled. Current data is between the specified upper and lower limits
f
LO Data compare is enabled. Current data is below the specified lower limit
f
33