BD PureWick PW100 Guía Del Usuario Y Garantía página 4

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

D
F
A
B
6.
Attach the collector tubing (G) to the connector port (H) on the collection canister
lid. Connect the other end of the collector tubing securely to a PureWick™ External
Catheter (I).
CAUTION: It is important that the port connections be connected correctly and
securely for proper operation of the PureWick™ Urine Collection System.
7.
Turn on the PureWick™ Urine Collection System by pressing the ON/OFF switch. The
PureWick™ Urine Collection System is working when the switch lights up green and
the device makes a soft humming sound. The system is now ready for use.
Operating Instructions
1.
After the PureWick™ Urine Collection System has been set up, place the PureWick™
External Catheter according to the PureWick™ External Catheter's instructions for use.
2.
When the canister is ready to be emptied, remove the PureWick™ External Catheter
according to the PureWick™ External Catheter's instructions for use and throw away.
Note: Keep the PureWick™ Urine Collection System ON to make sure all urine has
been drawn out of the collector tubing and into the collection canister before
removing the PureWick™ External Catheter.
Note: Although the canister can hold up to 2000cc (mL), to prevent overflow empty
urine from the collection canister regularly or before volume reaches 1800cc (mL).
3.
Turn off the PureWick™ Urine Collection System by pressing the ON/OFF switch.
Disconnect the A/C power cord from the power outlet and from the device.
Disconnect collector tubing and pump tubing from the canister.
4.
Lift collection canister from PureWick™ Urine Collection System. Do not lift
canister by the lid. Take canister into an area appropriate for disposal e.g. a
bathroom, carefully remove the lid, and dispose of urine in a proper receptacle
e.g. a toilet or according to facility protocol. If using a privacy cover and it gets
wet, remove and discard.
5.
Clean collector tubing, pump tubing, canister, PureWick™ Urine Collection
System, and power cord according to cleaning instructions in the Cleaning and
Maintenance section.
E
H
G
C
I
PureWick™ Urine
Collection System
Device electrical
cord port
2000cc Collection
canister with lid
Pump tubing
Pump tubing port
to canister
Connector port for
pump tubing
Collector tubing with
elbow connector
Connector port for
collector tubing
Attach PureWick™
External Catheter
(sold separately)
4
Privacy Cover
(optional)
slides onto
Collection
Canister
as shown

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Purewick pw200

Tabla de contenido