Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
3)
Uninstall the air deflector removing the 2 assembly screws.
4)
Slip the duct onto the bottom of the deflector.
5)
Place the assembled deflector and duct work over the exhaust outlet from the hood.
6)
Assemble the air deflector to the duct cover bracket, with the 2 assembly screws provided.
7)
Use duct tape to seal the deflector and the exhaust outlet from the hood, as is shown in the following image.
The duct tape must be approved for this application.
Ductwork
CHARCOAL FILTER INSTALLATION
•
Position the charcoal filter over the grease filter and insert the 4 springs (to prevent movement).
•
Reinstall the grease filter onto the bottom of the hood.
Note: After 120 functional hours the charcoal filter must be replaced.
Duct tape
over seams
Hood
3
Airflow
Publicidad
Tabla de contenido
