Clean The Rolling Brush - EUFY RoboVac G20 Hybrid Manual Del Usuario

Do not use hot water or any detergent to clean the filter.
6 Air-dry the dust collector and filter completely before next use. You may use
another filter if the original one is not dry.
7 Place the filter back into the dust collector.
8
Push the dust collector back into the main unit.
26 EN
24h

Clean the Rolling Brush

1
Pull on the release tabs to unlock the brush guard as shown.
2 Lift the rolling brush to remove.
3 Clean the rolling brush with the cleaning tool.
4
Reinstall the rolling brush by inserting the fixed protruding end first and then
clicking into place.
5
Press down to snap the brush guard into place.
1
3
4
2
5
EN 27