Select Boostiq™ Feature; Use Mopping System - EUFY RoboVac G20 Hybrid Manual Del Usuario

Select BoostIQ™ feature
In the EufyHome app, select the BoostIQ™ feature according to your needs. RoboVac
will automatically increase the suction power if it detects that stronger power is
needed to ensure the best clean. BoostIQ™ is ideal for cleaning thicker carpets and
hard-to-sweep messes, which will reduce the total cleaning time, but increase the
noise level. If the vacuuming noise caused by BoostIQ™ disturbs you, you can disable
this feature.

Use Mopping System

• The mopping mode is only intended for a clean floor without stubborn
stains or liquids. To avoid staining floors, do not use the mopping function
when dust is mixed with liquids such as coffee or ink.
• Mopping System cleans best on smooth hard surfaces and may not
perform so well on uneven tiles, heavily waxed floors or rough surfaces
like slate or brick.
• The mopping mode is not recommended when no one is at home.
• Do not use the mopping mode on a carpeted floor. It is recommended to
place boundary strips (sold separately) to avoid cleaning the carpeted
area.
1
Before mopping, install the waterproof pad under the Charging Base to protect
the floor.
2 Wet the mopping cloth and wring it until it does not drip. Insert the cloth along
the bracket slot and stick it firmly.
20 EN
3
Open the water inlet cover to fill the water, then close the cover.
Do not use any cleaning solution other than those specified by eufy, as it
may damage the water tank.
4
Install the water tank into the bottom of RoboVac until a click is heard.
The mopping mode is only intended for a clean floor without stubborn
stains. To achieve a better mopping effect, it is recommended to clean the
floor with RoboVac three times before installing the mopping module.
5
Select a cleaning mode to start cleaning.
- RoboVac automatically sweeps and mops in the selected mode.
EN 21