Accu-Chek Performa Instrucciones De Uso página 39

306_33481_PerfManLAapacEN.qxp
When you are setting the time for the alarm clock function, the bell symbol remains on the
display and "set-up" flashes continuously.
1. Press to turn the
meter on. The flashing
test strip symbol appears.
3/9/07 8:42 AM Page 37
2. Enter the set-up mode 3. Press and release
(press and hold for
about four seconds).
"Set-up" flashes on the
display.
37
repeatedly until you reach
the display with the bell
symbol, "OFF," and the
flashing "set-up" and
"A-1."