Downloading Your Results To A Computer Or Pda; Transferring Data - Accu-Chek Performa Instrucciones De Uso

306_33481_PerfManLAapacEN.qxp

Downloading Your Results to a Computer or PDA

You can transfer your stored results to a
computer to track, identify patterns, and print.

Transferring Data

1. Turn off your meter.
2. Install the software according to the instructions.
3. Connect the infrared meter cable to a 9-pin serial port
connector on the back of your computer.
4. Run the software program and follow the instructions about
how to download information. Make sure the software is
ready to accept data from the meter.
5. Press and hold the and
arrows flash on the meter display. The meter is ready to
transfer data.
3/9/07 8:42 AM Page 43
on the meter until two
Infrared (IR)
Window
43