Interacoustics Impedance Audiometer Titan Manual De Instrucciones página 14

1.9 Titan for Pc-Controlled Use
(ABRIS440)
1. Place Titan in its
cradle. PreAmp should
be connected.
4. Start OtoAccess™ or
Noah3, select patient,
open Titan Suite
7, 11
6
9, 13
Note: Display of results will differ
depending on setup
5. Select the Module tab for
the relevant test
6. Select protocol
7. Select ear
8. Place transducer/s in
the ear/s
9. Press Start
10./14. View recording and wait until done
Titan Instruction for Use - English
Date: 2011-06-06
2. Switch Titan on
by selecting ear
3. Attach the transducer
8, 12
Page 10/25
for testing.
5
11. Select other ear
12. Place
transducer/s in
the ear/s
13. Press Start
1
3
2
16. Save data
15. Print data
Note: When using a binaural
transducer (inserts or
headphones) and the nape
montage, both ears can be
tested simultaneously.