Setting The Alarm Clock Function - Accu-Chek Performa Instrucciones De Uso

TIME / DATE BEEPER
(hrs, min, day, (on/off)
month, year)

Setting the Alarm Clock Function

The alarm clock function is a handy way to remind you to test. You can set 1 to 4 alarms per
day. The meter beeps every two minutes – up to three times. You can turn the alarm off by
inserting a test strip or pressing any button. You must have the beeper set to "On" for the
alarm to sound.
Your meter is preset with the alarm clock function set to "OFF". You must turn it "On" to use
this feature.
If you turn A-1, A-2, A-3, and A-4 on, your meter is preset with the following times for your
convenience. You can adjust the times to suit your needs.
A-1 8:00 A-2 12:00
Notes:
• I f you tested within 30 minutes of an alarm, the alarm does not occur.
• I f the meter is on at the alarm time, the alarm does not occur.
• Exposure to cold conditions may disable alarms until the meter is turned on.
All manuals and user guides at all-guides.com
You are here
ALARM CLOCK
(A-1, A-2, A-3, A-4)
A-3 18:00 A-4 22:00
HYPO ALARM
(off, on, level)
37