Button Function - Accu-Chek Performa Instrucciones De Uso

1
Your New System
Button Functions
Here are the functions of the power/set and arrow buttons on the meter. These functions are used
throughout this manual. For more information on using these buttons during meter setup, see Chapter 3,
Meter Memory, Setup, and Data Transfer.
Button Function
Turn the meter on or off.
(power/set
button)
Enter the set-up mode.
Set the chosen feature.
Exit the set-up mode at any time.
Check the display segments.
or
Adjust settings for time and date,
beeper, test reminders, and
(right arrow
hypoglycaemic alert.
and left
arrow
buttons)
Enter memory.
Mark a blood glucose result.
Document Name: ART-07022590007
Document Number: 0000109119
Version: 1.0
This copy will not be updated. Verify the validity of this version in the appropriate electronic repository.
8
78120_07022590007_EN.indb 8
Action
Press and release .
Turn the meter on. Press and hold
appears on the display.
Press and release .
Press and hold until the flashing test strip
symbol appears on the display.
Turn the meter off. Press and hold
complete display.
If one of the segments is missing or looks different
from the picture, do not use the meter. Contact
Roche.
Press and release or .
Press and hold or to scroll faster.
Press and release or .
Press and release or
Lifecycle Status: Effective
until set-up
to see the
4/23/2019 1:56:36 PM
Confidential
Valid from: 02-Aug-2019
Page 10 of (180) page(s)