Error Messages - Microlife WatchBP home Manual De Instrucciones

Error messages

If an error occurs during measurement, the
measurement is interrupted and an error message
«Er» is displayed.
•
Please consult your doctor,
if this or any other problem
occurs repeatedly.
•
If you think the results are
unusual, please read through
the information in this
instruction manual carefully.
28
All manuals and user guides at all-guides.com
Error
«Er 1»
«Er 2»
Description Potential cause and
remedy
Signal too The pulse signals on the cuff
weak are too weak. Re-position
the cuff and repeat the
measurement.
Error signal
During the measurement,
error signals were detected
by the cuff, caused for
instance by movement or
muscle tension. Repeat the
measurement, keeping
your arm still.