About This Product; Specifi Cations; Use Of The Automatic Lubrication Unit Lu 2/P; Version Of The Automatic Lubrication Unit Lu 2/P - Bosch rexroth LU 2/P Instrucciones De Montaje

5 About this product

5.1 Specifi cations
5.1.1 Use of the automatic lubrication unit LU 2/P
• Lubrication of concealed running transport chains in the transfer system TS 2plus.
• For lubrication of several BS 2/... belt sections or SE 2/... Conveyor units in the
drive module. Observe the maximum wire length (see section 16 Technical data).
• Exclusively for use with 2 identical lubricating pins per BS 2/... belt section or
SE 2/... conveyor unit.
5.1.2 Version of the automatic lubrication unit LU 2/P
• The automatic lubrication unit LU 2/P consists of the components
– Automatic lubrication unit LU 2/P-24V-3L, 3 842 562 921
– Assembly kit LU 2/P, 3 842 562 923 1)
– Hydraulic blocks LU 2/M-... for dosing valves 1)
– Dosing valve sets LU 2/V-... 1)
– Adapter sets AS 2/... 1)
– PA hose set D4x3/L=20m, 3 842 562 9251)
– Steel tube set D=4mm/7x3m, 3 842 562 9261)
– Oil 5l Structovis GHD, 3 842 562 941 1) (observe the safety data sheet of the
manufacturer, see Table 1 on page 6)
1) Not included in the scope of delivery, please order separately.
3 842 557 976/2020-08, MIT: LU 2/P-24V-3L, Bosch Rexroth AG
About this product 13/42