Symbols Used; In The Documentation; Warning Notices - Structure And Meaning; Symbols In This Documentation - Bosch TCE 4460 Manual Original

1.

Symbols used

1.1

In the documentation

1.1.1

Warning notices - Structure and meaning

Warning notices warn of dangers to the user or people in
the vicinity. Warning notices also indicate the consequen-
ces of the hazard as well as preventive action. Warning
notices have the following structure:
Warning
KEY WORD – Nature and source of hazard!
symbol
Consequences of hazard in the event of failu-
re to observe action and information given.
€
Hazard prevention action and information.
The key word indicates the likelihood of occurrence and
the severity of the hazard in the event of non-observance:
Key word Probability of
occurrence
DANGER Immediate impen-
ding danger
WARNING
Possible impending
danger
CAUTION Possible dangerous
situation
1.1.2

Symbols in this documentation

Symbol Designation Explanation
Attention Warns about possible property damage.
!
Information Practical hints and other
i
useful information.
1. Multi-step Instruction consisting of several steps.
2. operation
One-step Instruction consisting of one step.
e
operation
Intermediate An instruction produces a visible inter-
«
result mediate result.
Final result There is a visible final result on com-
"
pletion of the instruction.
Robert Bosch GmbH
Severity of danger if inst-
ructions not observed
Death or severe injury
Death or severe injury
Minor injury
Symbols used | TCE 4460 | 39
1.2

On the product

!
Observe all warning notices on products and ensure
they remain legible.
Elektrische Spannung
Stromschlaggefahr bei Berührung von elektri-
schen Teilen.
Montagekopf
Verletzungsgefahr durch Einquetschen der
Hände zwischen Montagekopf und Felge.
Abdrückeinheit
Verletzungsgefahr durch Einquetschen von
Körperteilen zwischen Abdrückeinheit und
Reifen.
Montagesäule
Verletzungsgefahr durch Einquetschen von
Körperteilen in unmittelbarer Nähe der kipp-
baren Montagesäule.
Mounting arms and mounting heads
Risk of hands being crushed between the
mounting arms, mounting heads, and rim.
en
|
1 695 105 428 2013-11-04