Recording A Source - Teac AG-D9100 Manual Del Usuario

Recording a Source

Recording program source
You can record a program source such as a record or
Compact Disc onto a cassette deck connected to the
TAPE 2 REC jacks.
1
TAPE 2 MONITOR OFF
Source
POWER ON
Source
Component
2
1. Turn the FUNCTION (source) selector corresponding
to the source to be recorded.
Make sure the TAPE 2 MONITOR button is set to OFF.
2. Play the source.
3. Operate the tape deck (TAPE 2) for recording.
Tape Monitoring
If the tape deck has separate record and playback
heads, during recording, the recorded sound can be
heard from the speakers with the TAPE 2 MONITOR
button set to ON.
Indicators Lit
Recording
Tape Deck 2
3
– 17 –
Dubbing from TAPE 2 to MD/TAPE 1
2 1
POWER ON
Tape Deck 2
3
1. Set the TAPE 2 MONITOR button to on.
2. Turn the FUNCTION selector, and select a source
(except MD/TAPE1).
3. Start playback on the tape deck (TAPE2).
4. Start recording on the tape deck (MD/TAPE1).
When copying with a double cassette deck, refer to
the operating instructions for the cassette deck.
TAPE
Indicator Lit
Recording
Tape Deck 1
4