Franke FH 604-1E 4I T PWL Instrucciones Para El Uso E Instalacion página 25

Power management for a
Limited Power Cooktop
(ECO)
Power management for a
Limited Power Cooktop
(ECO)
Induction plate
Ø (mm)
Level
0
1
2
3
4
5
6
7
8
9
P
All manuals and user guides at all-guides.com
The sequence to set a new Cooktop Power Limit is:
▪ During the first 30 seconds after plugging the appliance.
▪ The Touch has to be unlocked and all Heaters Off.
▪ Push at the same time (C of heater 1) and (C of heater 3) keys.
▪ Once this is done, a beep sounds and the "actual Cooktop Power Limit" will be in the
display 1 and in the display 3.
For selecting a new Power Limit:
▪ With the (B) or (E) keys, the Power Limit is increased/decreased. The selectable
powers are: 2800 W, 3500 W, 6000 W or 7200W.
The sequence to finish recording the new Cooktop Power Limit is :
▪ Push at the same time (C of heater 1) and (C of heater 3) keys.
▪ Once this is done, new Cooktop Power Limit is recorded and there is a system reset.
To finish without recording changes:
▪ If during 60 seconds there is no action, changes are not recorded and there is a system
reset.
For reduced power cooktops, each time the user tries to increase the power, the total
power level of the cooktop is calculated. If this total power level is greater than the
cooktop power limit, the power increase is not allowed. An error beep sounds and the
heater display shows the actual power level and an 'r' blinking.
1-3 2-4
210 145
Power (W)
0 0
100 75
200 150
300 300
500 400
700 500
900 600
1100 800
1300 1000
1500 1200
2000 1600
25