Creating A New Measuring Location - WIKA ACS-10 Manual De Instrucciones

5. Commissioning, operation
For filling, enter the target pressure in the "Service" menu and tap the "Start Filling"
button (1). Model ACS-10 then displays the necessary steps and starts the filling
process until the specified target pressure.
EN


5.4 Creating a new measuring location

New measuring locations can be created via the menu item "Data" by tapping the button
"Device List" (1).
Alternatively, a WIKA SF₆ leakage detection system (e.g. model GDM-100) can be
selected as a template from the "Template Catalog" (2).


64 WIKA Betriebsanleitung Kalibriersystem, Typ ACS-10