Spare Parts; Device Specifications - FLAEM PRO LINE PulmoWaves 2 Instrucciones Para El Uso

AIR FILTERING

SPARE PARTS

Description of parts
Set of tubes shq L.800, L.690, L.90
Anti-bacterial filter
Mouthpiece
PEP dispenser
Nose clip
Clip for external tubes
Manual
Porex filter for compressor
RF8 Plus
Use only with original Flaem accessories.

DEVICE SPECIFICATIONS

Compressor Model P0112EM F1000
Power source:
Fuse
Noise (at 1 m):
Operating conditions:
Min temperature 5°C; max. 40 ° C
Air humidity min. 10%; max. 95%
Storage and transport conditions:
Min temperature -25°C; max. 70°C
Air humidity min. 10%; max. 95%
Operating / Storage Atmospheric Pressure:
min. 69 KPa; max. 106 KPa
APPLIED PARTS
Type BF applied parts are:
patient accessories (C2)
19
The device is fitted with a suction filter, located inside the flow
regulator (A3), which must be replaced when it is dirty or disco-
loured. To replace it, lift the flow regulator (A3) and extract the
Filter.
Do not wash or reuse the same Filter. Regular replacement is
necessary to assure proper compressor performance. The Filter
must be regularly checked. Contact your retailer or authorised
service centre for replacement filters.
ACO662P ACO663P
Six-month pack Patient pack
consumables individ. cons.
1
24
1
1
1
5
1
1
-
230 V ~ 50 Hz / 140 VA
1x T2AL 250V
55 dB (A) (approx.)
KIT code
ACO664P
Outpatient
pack cons.
1 -
1 1
1 1
1 1
1 1
5 -
1 1
- -
- -
Ultrasonic Nebuliser Device Model P0112EM
Power supply
Nebulisation ml/min
MMAD
(2)
Respirable fraction <5μm
(2)
Medication cup capacity
Data recorded according to internal Flaem procedure
(1)
I29-P07.5.
Data calculated on the basis of the values obtained with
(2)
Malvern Spraytec, and compared with the values of the tests
performed at the University of Parma.
Appliance dimensions
Weight
Bag dimensions
guarantee
ACO665P ACO077B
Outpatient Patient
pack daily individ.
3 -
- -
- -
- -
- -
15 -
1 -
- -
- 1
12 V
0.32 ml/min'
(1)
4.26 μm
51.7 % (approx. )
8 ml
22 (L) x 11 (P) x 23 (H) cm
2.200 Kg
27 (L) x 17 (P) x 25 (H) cm
2 year