ESAB Powercut-1300 Manual De Instrucciones página 138

SECTION 3
2. Connect the torch cable receptacle to the panel receptacle. Check
orientation of the sockets to ensure a correct fit.
Panel Receptacle
Torch Cable Male
Receptacle
3. Connect the air hose to the quick-connect fitting. Place the strain relief in the square cutout in the front of
the console. Line up the groove of the strain relief with the half square cutout area.
Air Hose quick-
connect fitting
4. Insert work cable into plug on the front of the console and turn
clockwise until secure.
5. Replace torch lead access door.
Torch Lead Access Door
Work Cable
138
INSTALLATION
square cutout
strain relief