Cleaning The Accessories - Kärcher VC 6100 Manual Del Usuario

Change the motor protection filter
Motor protection filter: change before the
last filter bag is removed from the filter bag
package.
The motor protection filter is behind the
inserted filter bag. Change the motor
protection filter before you insert the filter
bag.
Illustration
Unlock the frame and remove.
Remove the lower part of the frame, take
out old engine protection filter and dis-
pose it off. Insert the new engine protec-
tion filter in the frame and replace the
lower part of the frame.
Illustration
Insert and click the frame into its place.
Change the HEPA-filter
Order no. 6.414-805
Filter for pure blower air.
HEPA filter: Change once a year.
Illustration
Open cover.
Voltage
Current type
Power protection,
min.
Output P
nom
Output P
max
Weight (without ac-
cessories)
Action radius
Dimensions
Nominal width, ac-
cessories
Subject to technical modifications!
Specifications
V 220 - 240
Hz 50/60
A 16
W 1600 1800
W 1800 2000
kg 7,0
m 10
mm ø 380 x 380
mm 35
Unlock the HEPA filter and remove.
Illustration
Insert the new HEPA filter and click it into
place.
Close the lid.
Cleaning of the ComfoGlide nozzle
The ComfoGlide nozzle must be cleaned
regularly!
Remove the nozzle from the suction
pipe.
Illustration
Clean the back steering roller:
The easiest way to do this, is to remove
the roller. Unscrew the axle and pull out.
Dust fluff, hair etc. can now be removed
easily. Fit the steering roller back into
place.

Cleaning the accessories

Illustration
Handle and suction tube can be discon-
nected in order to clean or if clogged.
Push the 2 interlocks and pull apart.
Connect handle and suction tube and in-
sert.
5
English 11
Deutsch