Kärcher VC 3 Manual De Usuario página 10

Vacuuming
ATTENTION
Overheating
The device shuts off automatically if it
overheats.
Switch the device off and pull out the
power plug.
Ensure that the floor nozzle, telescopic
suction pipe and suction hose are not
clogged.
Replace the filter if necessary.
Allow the device to cool down for at
least 1 hour after eliminating the cause
of the fault.
1. Switch the device on.
10
2. Adjust the suction power with the
suction control to suit the vacuuming
situation.
a Open the suction control for re-
duced suction power.
b Close the suction control for nor-
mal suction power.
 Low suction force for curtains, tex-
tiles, upholstery, cushions
 Medium suction force for lightly
soiled carpets, carpet tiles and high-
quality carpets
 Medium suction force for hard floors,
heavily soiled carpets and carpet tiles
3. Hang the floor nozzle in the park
bracket on the rear of the device for
storage or during short work breaks.
English