Kärcher VC 3 Manual De Usuario página 14

Cleaning the cyclone separator
Clean the cyclone separator if it is visi-
bly dirty.
ATTENTION
Incorrect cleaning
Damage to the device
Do not use detergents or boiling water
for cleaning.
Never immerse the cyclone separator
in water.
Never dry the foam insert with a hair
dryer.
Allow the cyclone separator and dust
container to dry out completely before
inserting them in the device.
1. Press the latch and remove the dust
container.
2.
1.
2. Turn the dust container cover coun-
terclockwise so that the marking
points to the unlocking symbol.
3. Remove the dust container.
14
For quick cleaning:
4. Clean the cyclone separator with a
soft sponge and then wipe down
with a damp cloth.
For thorough cleaning:
5. Disassemble the cyclone separator
and clean the sieve and clean under
running water.
Note
The dust container can also be
cleaned under running water.
6. Turn the dust container cover clock-
wise so that the marking points to
the locking symbol.
7. Insert the dust container into the de-
vice and latch it into place.
English
1.
3.
2.