Finishing Operation; Transportation And Storage - Kärcher VC 3 Manual De Usuario

Using the parquet nozzle
* Depending on equipment
The parquet nozzle is suitable for vac-
uuming sensitive, smooth floors, .e.g
parquet, marble, terracotta
1. Replace the floor nozzle with the
parquet nozzle.

Finishing operation

1. Switch off the device.
2. Press the cable winding button.
2.
The cable automatically retracts into
the device.
3. Hang the floor nozzle in the park
bracket on the rear of the device and
press it into the latched position.
12
Note
KÄRCHER recommends fully retract-
ing the telescopic suction pipe before

transportation and storage.

1. Lift up the device by the carrying
2. Hang the floor nozzle in the park
1.
3. Store the device in a dry room.
English
Transportation and storage
handle, and carry it.
bracket.