Installation Instructions; Ceiling Support Structures; Install Range Hood - arietta Matera Guía De Instrucciones Para Instalación

Installation instructions

Ceiling support structures

• This vent hood is heavy. Adequate structure and support must
be provided in all types of installations.
• At the hood location, install 2"x 4" cross framing between
ceiling joists as shown. (2"x 4" are required to support the
weight of the hood.)
• Arrange cross framing in the ceiling to suit the existing
structure.
• Your ceiling joists will be like one of the following:
Example A
NOTE: Top view ceiling joists
parallel to front of hood
7 ⁄ "
1
16"
1 6
(17.9cm)
(40.6 cm)
joist spacing
Example B
NOTE: Top view ceiling joists
parallel to front of hood
16"
(40.6 cm)
over duct/cooktop
joist spacing
7 ⁄ "
1
1 6
(17.9cm)
Example C
NOTE: Top view ceiling joists
parallel to front of hood
10 ⁄ " (25.5 cm)
1
1 6
install cross-framing
symmetrically over
duct/cooktop
7 ⁄ "
1
1 6
(17.9cm)
16"
(40.6 cm)
joist spacing
Hood front
10 ⁄ " (25.5 cm)
1
1 6
install cross-
framing
symmetrically
over duct/cooktop
Centerline
Ø 6 ⁄ " (15.9
1
4
cm) duct
2 x 4 cross
framing
Align duct to Cooktop
center of cooktop outline
Hood front
10 ⁄ " (25.5 cm)
1
1 6
install cross-
framing
symmetrically
Centerline
2 x 4 cross
framing
Ø 6" (15.9v
cm) duct
Align duct to Cooktop
center of cooktop outline
Hood front
Centerline
2 x 4 cross
framing
Ø 6 ⁄ " (15.9
1
4
cm) duct
Align duct to Cooktop
center of cooktop outline

Install Range Hood

1. Place the template in the ceiling considering the instructions
for ceiling support structures.
NOTE: Always consider the front of hood legend when placing
the template on the ceiling. It will define the control's location.
2. Mark with a pencil the hole locations for screws and duct in
the ceiling.
3. Fix the upper horizontal support with 4 - 5x45 mm screws.
4. Remove mounting template
5. Install the 6" (15.2 cm) round transition with 2 - 3.5x9.5 mm
screws.
A. 6" round transition
B. Hood assembly
C. 2 - 3.5 x 9.5 mm screws
B
6