5.4 STEP 4
•
Place the corrugated washers (31) on the bearing tubes (32) on both sides of the wheel.
•
Then attach the left (57) and right pedal bar (58) to the wheel with the hexagon head screws (33),
spring washers (8) and washers (34), using a socket wrench.
•
Connect the left (57) and right pedal bar (58) on both sides with the lower handle bars (27, 28):
Tighten the hexagon head screws (97), spring washers (8), washers (100) and the connecting screws
(99).
•
Place the cover caps (60) over the openings on the pedal bars.
(64) 6mm (Qty 1)
(33) M8×20 (Qty 4)
(34) Ø8xØ22×2T (Qty 4)
(8) Ø8.5xØ13.5×2.5T (Qty 4)
(31) Ø17xØ25 (Qty 4)
EN
DE
35