Display - SPORTSTECH CX700 Manual De Instrucciones

VALUE SETTING BUTTONS UP / DOWN:
• During a training session, press these buttons to increase (up) or decrease (down) the intensity
level. Press and hold the appropriate button to quickly increase or decrease the intensity by
several levels.
• Press these buttons during program or target value selection or colour selection to switch
between the individual options.
COLOUR MODE SELECTION:
• Press and hold this button in stand-by mode to access the colour mode selection. The different
lighting options are described in the 'COLOUR MODE' section of this manual.
• During a training session, press this button to turn the display lighting on or off.

7.1 DISPLAY

The display has 7 different sections:
1. CALORIES:
Estimated value of calories burned so far during the training session. The actual value depends on a
variety of different factors. A clinically accurate indication is, therefore, not possible with this training
device. The display range is from 0 to 999 kcal.
2. TIME:
Time elapsed so far during your training session; shown as [minutes:seconds] or as [hours.minutes]. The
display range is from 0:00 to 99.59.
3. PULSE:
Your current heart rate in beats per minute (BPM). It is measured by the grip sensors on the sensor
bracket or by a pulse belt connected via bluetooth. Please be aware here too, it is not possible to provide
clinically precise information. The display range is from 30 to 220 BPM.
4. DISTANCE:
Distance in kilometers that you've covered so far during your training session. The display range is from
0.00 to 99.99 km.
5. RPM / SPEED:
In this segment, the display alternates every 5 seconds between the current pedal revolutions per minute
(RPM) and the current speed in km/h (SPEED). The display range is 0 to 999 RPM and 0.0 to 99.9 km/h.
6. WATT / LEVEL:
In this segment, the display alternates every 5 seconds between the power in watts (WATT) you currently
produce and the current intensity level (LEVEL). The display range is 0 to 726 watts and Level 1 to 24.
7. DOT GRAPHIC FOR INTENSITY LEVELS:
Dot columns indicate the current and the upcoming intensity levels. The flashing dots show the current
level. The steady dots to the right of the flashing ones show the next levels. Each dot represents 3 intensity
levels. (Example: The intensity levels 6 to 8 are represented by 2 vertical dots, the levels 9 to 11 by 3 dots
etc.). Maximum column height is 8 dots. Each column represents one minute training time; a maximum of
20 minutes is shown.
• After 5 minutes of inactivity, the display will turn off and go black. To reactivate it, press one of the
function keys, for example, the Start/Pause button.
42