5.8 STEP 8
•
Attach the left (12) and right (24) upper handle bars to the lower handle bars (27, 28), using an Allen
key.
•
Fix the covers (16 + 22 & 25 + 26) to the handle holder (11) with the Phillips screws (15), using the
cross-tip screwdriver (64).
•
Mount bottle holder (113) on the main tube, using the cross-tip screwdriver (64).
5.9 FINAL STEPS
•
Check again the strength of all connections. Repeat these checks before each use.
•
Clean the device thoroughly before first use, as there may be oil residues and dust on it due to
production and packaging
We wish you a lot of fun!
(20) Ø8xØ19×2T (Qty 8)
(19) M8×38mm (Qty 4)
(8) Ø8.5xØ13.5×2.5T (Qty 4)
(64) 6mm (Qty 1)
(35) M8 (Qty 8)
(88) 10-13-15 (Qty 1)
EN
DE
39