Husqvarna MADSAW 525iDEPS Manual De Usuario página 11

dealer, ask him for the address of
your nearest service agent.
To do a check of the user interface
1. Press and hold the start/stop button (A).
A
a) The product is on when the display (B)
comes on.
b) The product is off when the display
goes off.
2. If the warning indicator on the display is on
or flashes, refer to
To do a check of the power trigger lockout
The power trigger lockout is designed to
prevent accidental operation. When you push
the power trigger lockout forward (1) and then
press the power trigger lockout against the
handle (2), the power trigger (3) is released.
When you release the handle, the power
trigger and the power trigger lockout both
move back to their original positions. This
movement is operated by three independent
springs.
3
1744 - 008 -
B
Keypad on page 27 .
2
1
1. Make sure that the power trigger is locked
when the power trigger lockout is in its
original position.
2. Press the power trigger and make sure it
returns to its original position when you
release it.
3. Make sure that the power trigger and the
power trigger lockout moves freely and that
the return spring operates correctly.
4. Start the product, refer to
product on page 17 .
5. Apply full speed.
6. Release the power trigger and make sure
that the cutting attachment stops and
remains still.
Safety instructions for the cutting equipment
WARNING:
instructions that follow before you
use the product.
• Only use approved guide bar/saw chain
combinations and filing equipment. Refer
Recommended cutting equipment on
to
page 31 for instructions.
• Use protective gloves when you use or
do maintenance on the saw chain. A saw
chain that does not move can also cause
injuries.
2
1
To start the
Read the warning
11